I need help unlocking my att Moto X 2014.

What I have done is place a tmobile sim card in the devices. I received a but it just goes away. I have place the correct apn setting in the devices but a signal doesn't show up.

Can someone help me get this phone unlock to use on Tmobile?

Sent from my Nexus 9 using Tapatalk

I am running the soak test 5.1 for the Pure edition Moto X 2014 xt1095, and the bugs are annoying me (the location icon persistent on the status bar and the 'emergency calls only') and I was wondering if there is a way to downgrade back to 5.0 without unlocking my bootloader.

xperia l
've unlocked bootloader by following the instructions provided on unlockbootloader.sonymobile.com/instructions and the fastboot tool sad "OKAY". Now when I try to turn it on again, I see SONY and then XPERIA logo, and then Xperia colour animation on the screen. It's been like that for more than an hour, and to turn it off I needed to pull out the battery. PC companion doesn't recognize it . I've tried holding the volume up button while starting up (the logos) and holding down both volume buttons and nothing happened.
Is there any way to fix this?

Hi all. I have an XT1097 that I have been trying unsuccessfully to SIM unlock. I have tried several unlock companies an all come back with the same 2 codes however they do not work. From what I can tell there doesn't appear to be a limit on the attempts. When I turn the phone on, it asks for the unlock code, but always comes back as unsuccessful. I have confirmed the IMEI a number of times so that is not the issue. I've heard there are a number of databases that the vendors can pull from. So far I have tried Cellunlocker.net, and Quickphoneunlock.com and another local person with no luck. I'm not a stranger to unlocking, but this is the first Motorola I have tried to do. Is there something quirky about them?

Does anyone have any ideas?

Thanks

This is a guide for XPERIA ACRO S (other xperia users can also reffer needed information)

I make this guide for noobs as there weren't such guide (even for my first time of flashing ROM I didn't get any such guide, so I decided to make one)

This Guide is especially for flashing BPaul's 5.1.1 ROM

So here Iam giving detail process to install Bpauls 5.1.1 with every links needed.

we are going to take below steps;

1. unlocking bootloader
2. flashing kernel with recoveries
3. backing up stock rom
4. installing bpauls 5.1.1

Special Thanks;

@BPaul (for awesome ROM)
@cobrato (for stock kernel)
@jajb (for gapps)


NOTE: I'AM NOT RESPONSIBLE IF YOU DAMAGED YOUR PHONE BY CROSS FLASHING OTHER ROMS,KERNELS ETC.
BELOW PROCESS IS SUCCESSFULLY CARRIED ON XPERIA ACRO S. AS NOOBS CAN MAKE MANY MISTAKES
I'AM NOT RESPONSIBLE FOR YOUR DAMAGE. -DO AT YOUR OWN RISK-



-Here we START-

*_UNLOCKING BOOTLOADER_*

(unlocking bootloader will erase everything on your phone, i suggest you to take backup of your data)

First of all you need to take unlocking code from official sony website (link below)

developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/

after clicking on above link, on the page scroll down

1.select your device

2.provide your imei

3.you'll get unlock code (save it properly)

Next you need to download minimal adb and fastboot (link below)

https://drive.google.com/file/d/0B1S...akE/view?pli=1

install it to your computer.

Now we have to connect phone in fastboot mode, follow below steps

1.Turn on usb debugging mode.

(setting > developer option > usb debugging)

2.Turn Off your Xperia Acro S

3.Press and Hold volume up button and then connect usb to computer.
(If you see Blue LED of phone, then everythis is going right)
(Let your computer install essential fastboot drivers)

Now open minimal adb and fastboot (we installed previosly)
Type below command

-fastboot devices

-fastboot -i 0x0fce oem unlock 0x(your unlock code without this brackets)

-fastboot reboot

DONE

(Now you have successfully unlocked your bootloader)


*_FLASHING KERNEL WITH RECOVERY'S_*

As you have STOCK ROM, you need to flash STOCK KERNEL with recoveries (link below)

forum.xda-developers.com/showthread.php?t=2309117

-The above kernel cantain CWN as well as TWRP

After opening above link, download respective kernel
Save the above downloaded kernel to fastboot folder on your computer.

-Get into fastboot mode and connect to computer

Now open minimal adb and fastboot (we installed previosly)
Type below command

-fastboot devices
-fastboot flash boot kernel_62B196_acroS.elf
-fastboot reboot

DONE

(Now you have successfully flashed kernel with recovery)


*_BACKINGUP STOCK ROM_*

As you have successfully flashed kernel with recoverys, its easy to take a full backup of your system.
To enter into recovery follow below steps

1.To get into CWM reboot your phone, press volume up key for few times when the magneta LED appears.
(To navigate use volume buttons, for selecting use power button)

2.To get into TWRP reboot your phone and tap the screen for few times when the magneta LED appears.

3.Select Backup.

DONE

(Now you have successfully Backedup your ROM)


*_FLASHING ROM BPaul's 5.1.1_*

For Flashing This ROM your phone (Xperia Acro S) needs to be rooted (if your not, use towelroot app, for me it was the easiest way to root my phone)
and USB Debugging in developers option should be enabled.


A] Download ROM BPaul's 5.1.1 (link below)

forum.xda-developers.com/showthread.php?t=2799765&page=54#post60570826

-Extract the above downloaded ROM to your computer
(you'll see 2img files and 2recoveries)



B] Here you need to download acro s kernel (link below)

d-h.st/nJXM



C] Download below minimal GApps for 5.1.1 and copy it to your sdcard/ext_sdcard(link below)

forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330

(keep this downloaded kernel to above extracted folder)

Now to flash this rom you need to download FLashtool (link below)

d-h.st/Kb8

install the above downloaded Flashtool to your computer.

1.Now to flash recovery open the extracted ROM, and open recovery folder (2recoveries)

2.Pick your Recovery CWM or TWRP (TWRP Recommended) and copy it to internal storage of your phone.

3.Open minimal adb and fastboot

Type below command;

-adb shell
-su
(confirm popup su request from your phone)
-dd if=/sdcard/twrp.img of=/dev/block/mmcblk0p11 OR dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p11

Now you need to flash 2img files, to do so follow below steps

1.Open Flashtool

2.Click Flash button (Lightning icon, top left)

3.Select Fastboot mode

4.Reboot phone to fastboot (power off phone>push vol up key and connect usb)

5.Now in flashtool select SYSTEM to flash and open system.img (wait for 6 minimum minutes)

6.Now select KERNEL to flash and open boot_07_05_15.img

7.Now select REBOOT DEVICE INTO SYSTEM.

8.Open your respected recovery (CWM or TWRP)

9.Install>your downloaded gapps from sdcard/ext_sdcard

10.Wipe cache + Dalvic cache + Factory reset

11.Reboot

DONE
(You have successfully installed BPaul's 5.1.1)

hii , i have an xperia p lt22i prototype 2.3.7 6.0.B.0.573 WORLD and after faild trying to flash a stock jelly bean i decided to unlock the bootloader , the operation seems to work but after that the phone now is constantly rebooting and i have a crying face ( sorry the phone is crashed wait.....) but after nothing is happen and it keeep rebooting ; please help me i'm in trouble now.

I managed to get a hold of a Razr M still running 98.30.1. Is there a way to take only the .10 (with proper build date) OTA & then unlock the bootloader? thanks! :)

Hi All,

I'm facing a critical problem. I have unlocked the bootloader using

Code:

---

fastboot -i 0x1ebf oem unlock

---

. I also ran the flashing CWM command in terminal

Code:

---

fastboot -i 0x1ebf flash recovery CM_Yureka_Recovery.img

---

. Which went succesfully as it shows messages like:

Code:

---

sending recovery...OKAY...writing recovery...OKAY...finished. total time 0.440 secs..

---

. But when I reboot into recovery mode, the cyanogen default recovery was there not the CWM recovery. Then I went to flash the SuperUser zip file browsing from sd card. Please note, that Internal/External I tried both. But its shows the typical signature verification failed error. I'm facing this problem on CM 12S. On CM 11s the whole rooting process went so well. So what should I do now? Need help ASAP. Thanks in advance.