I had to factory reset my MOTOACTV and since then I can't authenticate with the server on the watch always get an error 140 and it says my username and password are wrong.
The username and password work though with the website and app.

Any ideas how to fix this?

HI guys. I have a bit of an issue with my phone.

It's the Sprint variant of the Galaxy Note 3 and I had been running Temasek's CM12 build on it. However, I wanted to try Sacs S6 port that was posted over at the Sprint Galaxy Note 3 forum.
I flashed it, but now when I try to load it, it gets stuck on the Samsung loading screen.

I tried to restore my phone back to the backup I made right before I flashed it but when I do that my phone shows the Galaxy Note III screen then turns black and nothing happens.

Any advice would be very appreciated. I'm very confused at the moment.

So yeah. Lot of issues going on.

When I try to slide up to unlock, the screen instantly turns off. Have to restart to get back in.

Also, my screen will get stuck in landscape at times.

Anyone else have these issues?

My Nexus 7 (2013) Wifi+3G tablet has had a notification for me to update to 5.0.2 from 4.4.3 for several months now, and I've tried to upgrade it for quite a while....but it won't allow me to do it. It does have root, using TWRP as my recovery, but that's all I've done to it.

In fact, when it does the reboot, it comes up with this:



Does anyone know why it does this? How I can fix this, short of manually sideloading 5.0.2?

Hello everyone,

yesterday I've been using my Nexus 9 with a bluetooth-OBD-Dongle in order to read ECU fault codes of a customers car, using the Torque Pro-App from Playstore.
After this being done, I put my Nexus on top of my desk, bluetooth and WiFi still turned on, with about 80% battery left. Eventually I came back into the office and wanted to unlock the device in order to check my mails, but there was a bad surprise: The nexus did not react on anything I've done. At first I thought the battery was dead due to some wakelock issue, but I couldn't really imagine that 80% battery charge were gone in less than 10 hours. I tried to boot into bootloader or recovery, but nothing worked. The screen stayed black.
Even after putting in the charger cable, nothing happened, no battery charging icon or something else. Simply no sign of life at all.

Currently on CM12 nightlies and Fire-Ice Kernel.

What do you guys think? Shall I wait a few days until the battery is completely dead and then try to charge/reboot it or send it immediately in and try to get a warranty repair/replacement?

Thanks :) :cowboy:

I have a 2013 original Nexus 5 black launch and quite frequently the screen will go black and I have to squeeze and bend the phone for it to come back on.

I am hoping to find out if this is a software or hardware issue.

If anyone here can help with this it would be much appreciated.

Regards,

ab

Hi, I've done goofed

Was trying to update this s2 to ICS from GB using the simple updater from samsung, but had a problem and the device became softbricked.
I could go into download mode only, else the soft brick icon would pop up

I was trying to charge it so i could go and try to recover it... But apparently all it did was discharge the battery :/
Now i can't even get into download mode. The only answer i get from the cellphone is when i plug it into my usb port, he turns on for 2 secs with the softbrick icon then goes off again...

How can i fix this? (Don't know anyone else with an s2, and all i have is an s4 to change batteries)

Thanks

XENOZU !! player won't play video anymore on my Gear S !!no matter with wifi or connecting to the phone via bluetooth? It always shows this screen. youtube-com-devicesupport

was working perfect until few day ago...
updated firmware to BOC1 , nothing change..
tried to reinstall app, no change..
factory reset watch ... nothing

Same problem was find on gear s google communities from Sharon Chen post
unfortunately i can't post the link...

any advices.. any one have this message error ??? Thanks.

Attached Thumbnails

 

Hey dudes, check it out bruhs my phone is kinda acting up.
The story goes one day i was using my phone while it was charging, then it turned off and i thought maybe the battery is low. I left it charging overnight thinking it was the battery only but sadly it wasn't. I tried to boot it and failed. Now every time i try to turn on my phone it will shut off by itself. As soon as i put the battery on my phone it automatically boots without pressing any button and shuts off after a couple of seconds. (I've tried a different battery no luck still) Any help would be
much appreciated thanks a lot!:crying::)

For some reason my notification light has been flashing green for a few days now. Rebooted, read all notificatons, everything.

It's the Alarm.

FIX:
Disable the alarm. Turn screen off. Wait for it to stop. Turn alarm back on.

I am specifically using stock rooted Verizon 39A Lollipop. No Xposed or notification apps. It could a bug on other lollipop builds. I am not sure what causes it to get stuck and doesn't always happen. Just a public service announcement.

First I rooted my phone from http://forum.xda-developers.com/note...ih-cf-t2903733 and it was a successful root and recovery. Afterwards I went to the X-Note metal theme in the xdadevelopers forum and downloaded the file from there and added the zip file to my internal storage. After putting the file in internal storage I went to the TWRP recovery and installed/flashed the zipped file. Now when my phone turns on it goes to the Samsung galaxy Note 4 screen when loading and it has 'Set Warranty Bit: Kernel' at the top left. I tried going back in to fix it but setting the phone to factory reset but it's the same result. I tried re-installing the root using Odin but there are no changes. Can anyone assist me?

Hi,
My machine would not turn on, so i plugged it straight into the charger without a battery and it worked fine.
I ordered a new battery and that worked great for a week or so and then it just wouldn't charge anymore.
after a day the machine was left with 1% and kept shutting down.
I would plug it into the charger and it would show the charging symbol that comes when the screen is turned off but no charge would go into the battery.
the machine works fine when i plug a cable directly into the battery port.
I tried changing the mini usb port flex cable, didnt help.
i tried many different chargers and cables all fit to carry 2A (and even a little more) current.
I really dont know what to do... the battery is new, all the cables are plugged in properly (inside the machine aswell i made sure all flex cables are well plugged).
Any ideas?
Thanks!

btw could someone tell me how i can charge the battery independently? so i can tell if the problem is with the machine or the battery?
Thank you!

hello there, I have a N910F and I have tried resetting it through the settings, as it goes into recovery it says 'installing system update' then just shows up the recovery without actually wiping the phone. when I do wipe the data it completes fine but when I click onto reboot system now an error comes up saying failed to mount data and something in brackets which I cant read because t reboots too quickly. the phone starts up with all my data still in tact.

I have also tried to flash the latest Lollipop version for the device but it as soon as I click start the flash fails. this is confusing me because this phone is not rooted. I even tried to flash TWRP but the stock recovery still seems to show up.

very puzzled would like to know if anyone can help me would appreciate it a lot! :good:

I've had the moto360 for a while and never had any problems till now, I had a normal day but the battery died before I could put it into the cradle. When I did, it showed the battery charging icon (not ring), after letting it charge for a while it wouldn't startup. After an hour it showed the battery charging ring, but when I lift it from its cradle it would go black. The next day, the screen doesn't display anything and when you press the button for a few seconds, it would vibrate and turn on the display (not showing anything. I hope it's not bricked!!!

So my LG G watch R started having a problem staying connected to my phone. No biggie. I tried doing a factory reset on my watch, wiped cache, data, etc. Then reboot, repaired to my phone and suddenly the watch will not sync apps. I have tried clearing the cache for google play and google play services, clearing cache and data for Android Wear app. Uninstalling and reinstalling Android Wear app. And even reflashing the system for the watch. All in vain. When I reset the watch, the only app that shows up in the "Start..." option on the phone is Google Fit.

I have even tried clearing the Dalvik cache on my phone (Samsung Galaxy Note 3 running Android 4.4.2).

Anyone else experience this? I have never had a problem with this before and this is perplexing.

Thanks!

Cheers,
B.D.

Hi I'm running JellySnap on my Samsung Galaxy s2 and I can't manage to put it into recovery so I can use a different rom, but don't get me wrong I'm no noob at booting my phone into recovery (Power off volume up buttons) but I think it's the Jellysnap rom that won't let me put it into recovery whenever i do the process of booting into recovery it just boots normally please help!

I did a factory reset from within the settings of the phone, it shows the erasing android and then flickers with and image of an android with triangle. Does this several times and then just stops on the android with red triangle. I can get into stock recovery, tried resetting from there but same thing happens. Also, if I just leave the phone it reboots and then tries to erase and then I get the same loop of it trying and failing.

Any ideas how to fix this? Phone is on the stock 5.0 rom and I have the pure edition.

Thanks

Hi all,

A week ago I followed this thread to unlock and root my phone. All went well and I flashed Venom 4.3.0 but now cannot receive calls (I was told I need the international firmware?). My phone had an OTA update to Lollip, and I was stupid and did not make a backup before flashing. I've looked and found some different options, one of which is a stock recovery here.

The biggest problem I'm having now is that I cannot get it to connect to the PC where I can copy over files. It says that the device has stopped responding or has been disconnected. I can delete and view everything, however. In searching around, it looks like some have had this issue with some corrupt files, but I cannot even copy a .jpg or empty .txt file. I have tried uninstalling HTC Sync and HTC Sync Manager, leaving them installed, uninstalling and leaving drivers, using just the drivers here, multiple cables, ports, and even different computers. Windows tries to install Android 1.0 when I connect while in the bootloader or TWRP, and it doesn't show up in explorer (I can see it in device manager as an android device).

Any help would be greatly appreciated!

Hi,

My brother has a Galaxy Mega I9200, using with custom rom and he told me to flash a stock rom and when i tried to flash 4.4.2 it won't boot stucking on samsung galaxy mega logo, wiped cache and dalvk cache tried kies but can't :/ any idea? i want to flash stock rom i cant flash 4.2.2 cuz of the knox bootloader and when i tried to any other 4.4.2 custom touchwiz ron its won't boot

Sorry for my bad eng

so i did averything people said and all i get

recovey is not seanenforcing
set warranty bit: recovey
two vibrates
normal boot to android any help or solution hope i get an answer
:eek::rolleyes::mad::(:fingers-crossed: