Affichage des articles dont le libellé est charge. Afficher tous les articles

Hi I bought my Nexus 7 2013 used in February. It came with a 3rd party charger and usb cable. It’s worked fine since I got it and it use to charge fine. I would use different usb cables and they would all work. Within the past 2 weeks or so it has become increasingly hard to charge it. Also this started happening on the stock 4.4.4 rom with root enabled. Today I installed a custom chroma 5.1.1 rom just to see if anything changed but it’s the same result it doesn't charge. The chroma rom says it has the Franco Kernel. Not really sure what that means but the stock rom's kernal wasn't changed.

I've left it off and connected charging to the AC for hours and would turn it on and it would have not raised at all in battery charge percentage. When it’s on and I can better see the percentage in this battery app I have installed I noticed if I jiggle the cable at all it will disconnect and connect again. So it might not be making good contact. It does this with every usb cable I have tried on it. However when I don’t move it and have it charging in sleep mode it does see it as connected and it says charging in the battery monitor widget app when I wake it, but it doesn't charge stays at the same percentage or lowers.

There is sometimes where I get lucky and it starts charging but it’s becoming increasingly tougher to get that to happen. I haven’t had any luck since last night messing around with it with different cables. I've even tried charging it on my PC but it’s the same result. It says charging but it doesn't charge. However if I do connect it to the PC I can view the files on the Nexus 7 fine as long as I don’t move the Nexus 7 much. I've also tried the AC adapter on my phone to see if it works and it works fine and charges. I've tried a kindle fire 9w charger on the Nexus 7 and that doesn't charge either.

Any idea what’s the problem? If I buy the official AC charger do you think it would work? Am I better off buying a Qi wifi charger? I rather not waste money on the AC charger if there is a good possibility of it not working.





Hello everyone,

yesterday I've been using my Nexus 9 with a bluetooth-OBD-Dongle in order to read ECU fault codes of a customers car, using the Torque Pro-App from Playstore.
After this being done, I put my Nexus on top of my desk, bluetooth and WiFi still turned on, with about 80% battery left. Eventually I came back into the office and wanted to unlock the device in order to check my mails, but there was a bad surprise: The nexus did not react on anything I've done. At first I thought the battery was dead due to some wakelock issue, but I couldn't really imagine that 80% battery charge were gone in less than 10 hours. I tried to boot into bootloader or recovery, but nothing worked. The screen stayed black.
Even after putting in the charger cable, nothing happened, no battery charging icon or something else. Simply no sign of life at all.

Currently on CM12 nightlies and Fire-Ice Kernel.

What do you guys think? Shall I wait a few days until the battery is completely dead and then try to charge/reboot it or send it immediately in and try to get a warranty repair/replacement?

Thanks :) :cowboy:





Hi, I've done goofed

Was trying to update this s2 to ICS from GB using the simple updater from samsung, but had a problem and the device became softbricked.
I could go into download mode only, else the soft brick icon would pop up

I was trying to charge it so i could go and try to recover it... But apparently all it did was discharge the battery :/
Now i can't even get into download mode. The only answer i get from the cellphone is when i plug it into my usb port, he turns on for 2 secs with the softbrick icon then goes off again...

How can i fix this? (Don't know anyone else with an s2, and all i have is an s4 to change batteries)

Thanks





I was wanting to get a set of a few quick charge 2.0 car chargers and wondered if anyone thinks this is a legit qualcomm 2.0 branding or a junk knockoff?

http://www.ebay.com/itm/Quick-Charge...d2f&rmvSB=true
.99 shipped

I have 3 cars I'd like to get a charger for (mine, wives, work car), so just wondered your opinions. Don't want to get it if I have to worry about it frying my phone. I most likely will get a puregear or tenergy, but wanted an opinion if I were to get this for a spare for my wives car.

I found their official site here: http://www.golzer.io/index.php/produ...ck-charge.html





Hey guys.

Got a big problem. My OnePlus One 64gb doesn't charge anymore. When I connect the original power cable, the led shines up for a very short time and then disappears. The percentage isn't going up. The icon in the statusbar whereas indicates that it would charge.
Currently I'm on 36%. I've powered off the device and plugged it in to the charger. But it seems that it isn't charging in this state too.

In the official OnePlus forums there are several other guys experiencing the same problem, but no solution was found.

Is there any help for me?

A USB connection to the PC seems to be impossible too.

Please help me guys. I need my phone!

Thanks





Hi,

I've been struggling for a while to fix this problem. It's like this: phone gets below 0%, and won't charge. Only thing you can do is hold the power button while connecting the charger. It boots, but doesn't detect charging so it shut's down. After that it boots again because of holding the power button. The 24 hour charge trick also doesn't work.

Things you need:
1. Small philips head screwdriver.
2. High quality 2A charger (I used a brand new Samsung S6 charger).

Solution:
1. Open your Xperia T by opening the SIM flap and remove the small screw.
2. Disconnect the battery flap.
3. Hold the power button.
4. Connect the battery flap.
5. Put the cable in your Xperia T.
6. Wait a few seconds.
7. Connect the charger to a socket.
8. Be patient.

Came across this by accident, has worked since with 2 devices.

KR,
RubenK





ROM

Hi guys, I would like to share "my" Sense 5 ROM. I am not a developer (if I was I wouldn't upload old & boring Sense 5 ^^), so it's way too far from perfect. I compiled kernel from HTC 4.18.401.4 crc source only with a few modifications (sweep2wake, doubletap2wake & fast charge and init.d support) - I used AOSP toolchain 4.6 -O2. It is ONLY for HTC ONE X International.

ALL CREDITS GO TO:
mike1986. for deodexed Stock ROM (and for his great ARHD^^)
DutchDanny for deodexed 4.18.401.4 patch
Onepagebook for One-X Two-Way Recording patch
lyapota, maxwen, n3ocort3x, Xmister, faux123, Alex-V for their hard work and kernel sources (I just copy-pasted from them)
teemo and Thömy for New Layout
Koush for Superuser

Features:
-Superuser by Koush
-busybox 1.23.1
-init.d support
-deodexed
-sweep2wake, doubletap2wake, fastcharge
-debloated
-enabled Two-Way Recording
-check below what's removed

Installation:
MANDATORY - do a full wipe (format Cache, Data, System; Wipe Cache, Wipe Dalvik Cache via Custom recovery)
flash ROM zip file from recovery
flash boot.img in fastboot
Reboot & Done

Kernel Configurations:



sweep2wake config:
Enable/Disable (1=enabled, 0=disabled, enabled by default)

Code:


echo "0" > /sys/android_touch/sweep2wake

Button panel locks to s2w after this distance (9 by default)

Code:


echo "VALUE" > /sys/android_touch/s2w_register_threshold

Screen turns on/off after this distance (325 by default)

Code:


echo "VALUE" > /sys/android_touch/s2w_min_distance

Direction independent(1=Yes, 0=No, 1=by default)

Code:


echo "0" > /sys/android_touch/s2w_allow_stroke

Pocket protection (1=Yes, 0=No, 0=by default)

Code:


echo "1" > /sys/android_touch/pocket_detect

DoubleTap2wake config:
Enable/Disable ((1=enabled, 0=disabled, disabled by default)

Code:


echo "1" > /sys/android_touch/s2w_allow_double_tap

Time double taps (ms) (500 by default)

Code:


echo "VALUE_in_ms" > /sys/android_touch/s2w_double_tap_threshold

Time between double taps (150 by default)

Code:


echo "VALUE_in_ms" > /sys/android_touch/s2w_double_tap_duration

Dead area in points from top of screen (0 by default)
put 1780 for dt2w works only on virtual keya area

Code:


echo "VALUE" > /sys/android_touch/s2w_double_tap_dead_area

Fast charge (1=enabled, 0=disabled, disabled by default)

Code:


echo "1" > /sys/devices/platform/htc_battery/fast_charge





ROM OS Version: 4.2.2 Jelly Bean
ROM Kernel: Linux 3.1.10 (compiled from 4.18.401.4 source)
ROM Firmware Required: JB Hboot

Removed stuff:




7digital
HTC Sync
Google Books
Dropbox
EAGamebox
Facebook
Flickr
Genie Widget
Gmail
Google Maps & Streets
HTC Deals
Skydrive
Chrome
Instagram
Flash Player
LinkedIN
LMI Rescue
Locations
Google Magazines
Google Music
News Plugin
PDF Viewer
PolarisOffice
Picasa
Google+
Hangouts
Soundhound
Stock
Talkback
TuneIN
Twitter
Google Voice Search
Google Watch
Youtube



GPS Settings:
ROM contains GPS settings for EUROPE. If you want to change it, edit /system/etc/gps.conf and change 5 NTP_SERVER lines to your locations (or even country). More info HERE

Africa



NTP_SERVER=0.africa.pool.ntp.org
NTP_SERVER=1.africa.pool.ntp.org
NTP_SERVER=2.africa.pool.ntp.org
NTP_SERVER=3.africa.pool.ntp.org
NTP_SERVER=africa.pool.ntp.org


Asia



NTP_SERVER=0.asia.pool.ntp.org
NTP_SERVER=1.asia.pool.ntp.org
NTP_SERVER=2.asia.pool.ntp.org
NTP_SERVER=3.asia.pool.ntp.org
NTP_SERVER=asia.pool.ntp.org


North America



NTP_SERVER=0.north-america.pool.ntp.org
NTP_SERVER=1.north-america.pool.ntp.org
NTP_SERVER=2.north-america.pool.ntp.org
NTP_SERVER=3.north-america.pool.ntp.org
NTP_SERVER=north-america.pool.ntp.org


South America



NTP_SERVER=0.south-america.pool.ntp.org
NTP_SERVER=1.south-america.pool.ntp.org
NTP_SERVER=2.south-america.pool.ntp.org
NTP_SERVER=3.south-america.pool.ntp.org
NTP_SERVER=south-america.pool.ntp.org


Oceania



NTP_SERVER=0.oceania.pool.ntp.org
NTP_SERVER=1.oceania.pool.ntp.org
NTP_SERVER=2.oceania.pool.ntp.org
NTP_SERVER=3.oceania.pool.ntp.org
NTP_SERVER=oceania.pool.ntp.org



Additional info:

If you want Flash Player back, download and install it from attachment. If you want sqlite3 or zipalign, download from attachment and install via recovery.

If you don't want to install all keyboard languages, just edit ROM zip with 7zip, navigate to /system/app/ and delete corresponding languages (CIMEXT9.apk - chinese & IMEXT9XXXX.apk - those are up to you).

DOWNLOADS:
Old Layout
New Layout









Hi,
My machine would not turn on, so i plugged it straight into the charger without a battery and it worked fine.
I ordered a new battery and that worked great for a week or so and then it just wouldn't charge anymore.
after a day the machine was left with 1% and kept shutting down.
I would plug it into the charger and it would show the charging symbol that comes when the screen is turned off but no charge would go into the battery.
the machine works fine when i plug a cable directly into the battery port.
I tried changing the mini usb port flex cable, didnt help.
i tried many different chargers and cables all fit to carry 2A (and even a little more) current.
I really dont know what to do... the battery is new, all the cables are plugged in properly (inside the machine aswell i made sure all flex cables are well plugged).
Any ideas?
Thanks!

btw could someone tell me how i can charge the battery independently? so i can tell if the problem is with the machine or the battery?
Thank you!





Hi
I just bought the galaxy s6 dual sim from expansys.com , the phone is great and i loved everything about it
except that it takes 6 hours to fully charge , I tried :
- draining off the battery.
- using another cabel
- rest factory

What is more scary is the website support, they don't answer any of my emails :(
I really hope i can find a soultion with u guys, otherwise it's just piece of junk :(

* If anyone knows how to get in touch with the support of Expansys i would appreciate it if u let me know ;)





This is my 3rd replacement from fk but still same problem, the phone doesnt charge when kept in charging with somewhat battery left, but charges properly when the battery goes null.
Observe the attached screenshot carefully, the phone suddenly goes awake and starts discharging battery instead of charging...plz try keeping phone to charge when battery is below 20%








Attached Thumbnails


Click image for larger version<br/><br/>Name:	1431888054953.jpg<br/>Views:	N/A<br/>Size:	80.9 KB<br/>ID:	3317807
 
















I know there is many article out there saying is OK to charge overnight as your phone is smart enough to prevent overcharge. But since this is a new adaptive fast charge charger, I thought it might have a different story. So guys, is it ok to charge overnight using the given adaptive fast charge charger? Thanks





Sent from my tab 4 using XDA Free mobile app





By battery is draining like anything and i doubt if it will last 6hrs. also, fast charge isn't working. for the first couple of charges, it worked and then it started taking 12 mins to charge one percent!